Machinery
Please scroll down for the range.

UK Sewing Services recommends that suitability tests are carried out on all items prior to production

Hot-Knives (GBP each)

(Please click on the thumbnail images for a larger versions)
(You should ensure that auto-resizing of images is turned off)

hot knife
Size (Blade) Model No. 1 2+ "Order-now" option
HERE
180mm HKLMK53/180/450w 400.31
180mm HKLMK53/180/350w 357.55
100mm HKLMK52/100/200w (shown above) 332.91
80mm HKLMK5/80/150w 309.68

This hand-held hot-knife is normally used to cut "man-made fibre" webbing, tapes & cords.
It is available with 3 sizes of blade length, 80mm, 100mm & 180mm, with 4 wattage options.
(the higher the wattage the hotter the knife will be)
Foot-operated "guillotine" options are also available, prices on application.
We always recommend the use of protective clothing whilst operating any machinery.
At the very least thermal protective gloves & eye protection should be worn whilst using hot-knives..

Standard Product code =  "Model No."

 
Industrial sewing machine stand, top & hinge sets
(Please see below for motor prices)

Fine quality standard machine 'Z' stand. Adjustable height, complete with treadle. Shipped flat packed.

Stand 68.63 Bulk order discounts available
*Standard lockstitch top 68.63 Bulk order discounts available
*Hinge sets 15.65 Bulk order discounts available

*Please specify make & model. Bulk order discounts available
Please call to confirm make & model pre-ordering. Stand design may vary.

All prices shown on this site are in GBP pounds sterling

Delivery UK mainland Stand..GBP 25.66, Top GBP 2566, Stand+Top GBP 51.17


Sewing thread stands
Thread stand

This stand has a base of approx 12cm in diameter and is approximately 41cm tall.
It is supplied complete with a centre pin to ensure your thread cones do not "wander".
There are two pre-set fixing holes should you choose to screw it to your worktop. It will take ALL standard industrial thread cones.

 Thread stand GBP each
Single cone stand 7.75
2+ Discounts available
Order HERE

Images for illustration only. Actual item design/colour may vary slightly may vary.

 Thread stands GBP
Economy (2 cone left) 17.44
Economy (4 cone not shown) 32.32
 Premium (2 cone right) 36.21

Economy:  The sewing thread stand screws to bench/work top 
or block. It is ideal for home dressmakers etc as it allows the 
use of industrial thread cones on domestic machinery.

Premium: This is a chromed industrial sewing thread stand. 
It most pas through the bench or worktop. It is secured by 
a locking nut underneath. It is more substantial than 
the economy model above.

5 & 6 cone thread stands also available.

product codes =" Econ2thst" or "Prem2thrdst" + quantity
Order email HERE
(Please load the order form once only)

All prices shown on this site are in GBP pounds sterling


Industrial machine motor

  High speed Slow speed
Output power (W) 400w (1/2hp) 400w(1/2hp)
Poles 2 4
Voltage (V) 220/240 220/240
Frequency (HZ) 50 50
Speed (RPM) 2850 1425
Temperature rise (K) <18 <22
Vibration (MM/S) <1.2 <1.2
Noise (dB) <53 <46

Only GBP 123.52
Each motor is supplied complete with switch & 120mm pulley.

(product code= FDM1+"HS" or "LS")
Order email HERE
(Please load the order form once only)

All prices shown on this site are in GBP pounds sterling

Delivery UK mainland GBP 22.50


Standard Bobbin winder

Suitable for most standard industrial lockstitch machines.

 GBP 19.35

Product code= BOBWINDSTD
Order email HERE
(Please load the order form once only)

Picture for illustration purposes only; UKSS always recommends the use of drive-belt covers.


Domestic machine motor kit. 

  SKT-390D SKT-290D
Volt (V) 230 230
Current (A) 0.45 0.45
Frequency (HZ) 50/60 50/60
Motor Speed (RPM) 6000 6000
Out put (W) 45 45
Input (W) 90 90
Net Weight (Kg) 1.35 1.35
Position Internal External
Price 65.39 88.33

Both motors are supplied complete with foot controller.

Product code= MOTRDM+"INT" or "EXT"
Order email HERE

All prices shown on this site are in GBP pounds sterling


KPR1
Foot operated ratchet press : Available to Purchase or Hire

(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images is turned off)
kpr1 thumbnail

(Foot operated ratchet press) : Available to Purchase or Hire

KPR1 is a foot operated ratchet press. It is supplied complete on a stand which incorporates two side trays for stud part storage. 
It is designed to attach most press fasteners, rivets eyelets, jeans buttons etc. It is extremely versatile and can be used for placing piercing trim on textiles or paper and card.
We can supply a full range of dies, which are made in the UK of hardened & tempered steel to fit our own ranges or your existing studs or eyelets.

It's fully floating adjustable base allows precision horizontal alignment and exact vertical locking in order to obtain the optimum pressure setting.
Once up to speed KPR1 is rated at approx. 240 studs and hour, thus eliminating the need for expensive pneumatic or electric machinery.
All new machines are sold with a 6 months back to base warranty, but anyone who has seen our KPR1 will know that
it's solid construction & simple internal design will facilitate many years of faithful, trouble-free service.

Demonstrations:
Please go HERE to see our 02"X" series round plastic fastener being set on our KPR1 press.

Go HERE to see our KPR1 press setting our 051 series heavy duty press-fastener.

Go HERE to see our KPR1 press setting our 032B pressfastener.

Go HERE to see our KPR1 press cutting & setting a standard eyelet.


Go HERE to see our KPR1 press setting a lacing eyelet

Click HERE to see our KPR1 press cutting & setting a plastic breather eyelet.

Please go HERE  to see 012B cap & nail being set on our KPR1 press.

Approx dimensions

Overall height 121cm
Height of worktop 80cm
Width of worktop 50cm
Depth of worktop 50cm
Total weight 30Kg

Order HERE

Full operating instruction are included with each machine.
KPR1 is so simple to use that a complete novice will be producing quality products within minutes !

In short our KPR1 is a solid robust machine that will add considerable value to your products, resulting in increased efficiency, quality, and
inevitably customer satisfaction.

Stud prices vary from GBP 0.06 to GBP 0.40 per set dependant on style and quantity.
UKSS supplies all the major stud ranges.
We supply our studs in individual parts packed in 1000's for those that may use more of one part than another
.

 

Outright KPR1 purchase price GBP 447.43
Purchase KPR1 over 3 monthly payments* GBP 164.05 per month
*Our KPR1(plus any tools) can be purchased by spreading the cost over 3 monthly payments.
Please advise and we would be delighted to raise the paperwork.


Purchase stock Die for KPR1 GBP  from 48.10(each)
Purchase Non-stock/standard Dies GBP  from 73.03 (each)

Rental prices
(Rental is available to UK addresses only and subject to status.)

(Below is based on our standard rental period of 6 months)
Shorter rental options may be available,
however charges will be higher and a refundable deposit will also be required)

  (Quarterly)
KPR1 press only 54.27
Standard dieset (2, 3 or 4 part) 21.47
Full kit (Press + Dieset) : Quarterly* 71.95*

* (Includes a discount)
No rental increase while the initial kit rented remains the same, guaranteed!

Please click here for printer friendly data sheet
kpr1

Please click here for specimen rental documents.

20% of all paid rental allowable as a rebate if you decide to purchase at the end of a rental term.
Minimum rental period 6 months. Subject to status.

Product code= KPR1
Order HERE

All prices shown on this site are in GBP pounds sterling

Delivery
UK mainland GBP 32.50
EU country between GBP 70.00 and  GBP 140.00,  3 - 7 days, cost & delivery time "country dependant".
 


KPF2 (Heavy duty Footpress)
This specialist press has been specifically designed for large format eyeleting operations
Available to Purchase or Hire

KPF2 is a foot operated press.

(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images is turned off)
heavy duty eyelet press

It has been specifically designed to accommodate large eyelets, 13mm-40mm internals.
Our KPF2 is supplied complete on a stand which incorporates two side trays for storage.
 It is extremely versatile and can be used for placing piercing trim on textiles or printed stock such as paper and card etc.

It's floating, adjustable base allows precision horizontal alignment. It's versatility eliminates the need for expensive high maintenance pneumatic or electric machinery.

All new machines are sold with a 6 months back to base warranty, but anyone who has seen our KPF2 will know that it's solid construction & simple internal design will facilitate many years of faithful, trouble-free service.

Approx dimensions (design subject to alteration)

Overall height 141cm
Height of worktop 91cm
Width of worktop 50cm
Depth of worktop 50cm
Total approx. weight 30Kg

KPF2 is so simple to use that a complete novice will be producing quality products within minutes !

In short our KPF2 is a sold robust machine that will add considerable value to your products, resulting in increased efficiency, quality and inevitably increased customer satisfaction.

Please click here for printer friendly data sheet

KPF2 purchase price GBP
400.53
Eyelet dies vary in price, dependant on size/complexity of design.
As an indication a 40mm cutting & closing set is 204.19

Rental prices
(Rental is available to UK addresses only and subject to status.)

(Below is based on our standard rental period of 6 months)
Shorter rental options may be available,
however charges will be higher and a refundable deposit will also be required)

KPPF2 press only 54.27
Standard dieset (2, 3 or 4 part) 21.57
Full kit(Press + Dieset) ; Quarterly 71.95*

* (Includes a 5% discount)
No rental increase while the initial kit rented remains the same, guaranteed!

20% of all paid rental allowable as a rebate if you decide to purchase at the end of a rental term.
Minimum rental period 6 months. Subject to status.


Product code= KPF2
Order HERE
(Please load the order form once only)

Delivery
UK mainland GBP 33.11
EU country between GBP 90.00 and  GBP 130.00,  3 - 7 days, cost & delivery time "country dependant".


For Button covering machinery please see ESAS51 & Little Dreamer below


ESAS51
(Button covering & eyeleting press) Available to Purchase or Hire

Precision made our ESAS51 will cut & 
cover most popular sizes & styles of buttons.

It is virtually maintenance free and will 
offer many years of faithful service.

For those that have sat long hours 
bravely covering buttons by hand this 
machine will make your mouths water !

You can easily cut & cover 2 buttons a minute,
there is no difference even if you are using our 
smallest buttons.

Our ESAS51 comes with a 6 months back to base warranty.

Purchase price ESAS51 GBP 542.86

Die(tools) prices

  C16L - C20L C22L-C36L
DOME 134.89 155.91
HALFBALL 151.76 119.94 (to C26L only)
CUTTER 42.59 48.74

4/7 Eyelet dieset

93.38

Please see for button component prices

Example of a typical kit purchase option.

ESAS51 press 542.86
C18L (11mm dome) dieset 134.89
C18L(20mm cutter for above) 42.59
1000 C18L dome button sets 38.91
Delivery(UK mainland) 24.85
Net total 736.20

Rental prices
(Rental is available to UK addresses only and subject to status.)

  Quarterly
ESAS51 press 64.87
Standard dieset & cutter 39.55
Full kit(both above items)* 99.19*

*Includes a 5% discount for full kit rental.
No rental increase while the initial kit rented remains the same, guaranteed!

Minimum rental period is 6 months.
20% of all paid rental currently allowable as a rebate if you decide to purchase at the end of a rental term.

Product code= ESAS51
Order email HERE
(Please load the order form once only)

Delivery
UK mainland GBP 23.50
EU country between GBP 57.00 and GBP 87.00,  3 - 7 days, cost & delivery time "country dependant".

All prices shown on this site are in GBP pounds sterling.


THE 'LITTLEDREAMER'
This economy press is designed with the small workroom in mind.
For higher production units please see ESAS51 above or ask for details on our other higher speed presses.
Option 1

Press, button covering dieset, cutter & delivery

3 months machine & button dieset kit rental
45.34
1000 complete button sets
38.31
Delivery (UK mainland)
12.50
Net total
96.15

Option 2
Press, button covering dieset, cutter, eyeleting dieset & delivery

110.57
3 months machine & button dieset kit rental
45.34
1000 complete button sets
38.31
3 months 4/7 eyeleting dieset rental
19.70
1000 4/7 eyelet sets (GOLD OR SILVER)
46.29
Delivery (UK mainland)
12.50
Net total 
162.14

The above is your initial outlay covering your initial rental quarter, consumables & delivery. 
Subsequent quarterly rental costs would be;

3 months kit rental : Button dieset only 

45.34

3 months kit rental full kit

65.04

No rental increase while the initial kit rented remains the same, guaranteed!

Click here for Specimen rental documents.

Kit above includes:
Little Dreamer Press, 1000 complete button sets,
Dome dieset & cutter, Cutting board & full instructions.
(plus optional 4/7 eyeleting dieset)

Product code =  LDRRO
Order email HERE
(Please load the order form once only)

(Rental is available to UK addresses only and subject to status.)
Minimum rental period is 6 months. 

Please see for button component prices

All prices shown on this site are in GBP pounds sterling


All prices shown on this site are in GBP pounds sterling


Legal stuff